Izdelki za jeklena jekla (26404)

Here is the range of the stainless steel winches which we have in our programme. Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. 

The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches (hoisting) TL = spur gear winches (hoisting) TC = spur gear winches (pulling) Version coding: FS = provided with cable drum free spool device SS = stainless steel...

Farbige, staubfreie Oberfläche, leicht zu reinigen, abriebfest für Geh- und leichten Rollverkehr Mind. zweimaliger Anstrich; Poren werden ausgefüllt. Es entsteht ein durchgehender, farbiger Film auf der Bodenoberfläche. Stärke ca. 0,2 - 0,4 mm

Our compane had selling sheet metal starts from 1994. We have our own warehouse, which consist more than 2000 tons of different steel sheets. Our prices are very good, because of we are trading metall directly from producers. We have a wide variety of steel grades for various applications.

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

M3.2 x 6mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

Entrust your sheet metal stamping to Marxam Project and experience excellence in metalworking. We offer the highest quality of service, precision and efficiency. Our advanced technology and skilled technologists with many years of experience ensure that each piece is carefully stamped to the customer's specifications. Whether you need small, unique parts or large-scale production, Marxam Project has all the necessary tools and knowledge to deliver customized products that will exceed your expectations. When you choose Marxam Project for sheet metal stamping, you are choosing a partner with many years of experience and a commitment to customer satisfaction. What sets us apart is our rigorous quality standards. Contact us today to learn more about our sheet metal stamping services and how we can help you achieve your production goals with precision and efficiency.

Natürlich! Hier ist eine Produktbeschreibung für den Continental SC20 Plus S Reifen auf Deutsch: Continental SC20 Plus S Reifen – Produktspezifikationen Modell: Continental SC20 Plus S Typ: Sommerreifen für Nutzfahrzeuge und Lkw Verfügbare Größen: Verschiedene Größen von 17 bis 22 Zoll Durchmesser Höhe/Breite: Variiert je nach Größe, typischerweise zwischen 65 und 80 für das Verhältnis sowie 195mm bis 315mm für die Breite Reifenaufbau: Radial Tragfähigkeitsindex: Variiert je nach Größe, typischerweise von 106 bis 150 Geschwindigkeitsindex: J (bis 100 km/h), L (bis 120 km/h), oder M (bis 130 km/h), je nach spezifischer Größe Profil: Symmetrisches Design für gleichmäßige Abnutzung und hohe Stabilität Eigenschaften: Langlebigkeit: Verbesserte Lebensdauer und Abriebfestigkeit für anspruchsvolle Nutzfahrzeuganwendungen

- Dichtung FPM - Werkstoff Edelstahl 1.4301 / 1.4307 - Temperaturbereich -20 bis +120 ˚C - Arbeitsdruckbereich -0,95 bis 24 bar Form:gerade Anwendung:pneumatischer Material:Edelstahl 1.4301/1.4307 Dichtung:FPM Funktion:Steckanschluss

Zum Schweissen von Stahlrohren! Die weit ausgesparten Brücken ermöglichen bis zu 80% der Wurzellage einzubringen, ohne die Zentrierung zu lösen. Die Druckschrauben ermöglichen, deformierte Rohre so auszurichten, dass ein bündiges Heften möglich ist. Eindimensional, von DN100 bis DN1200 verfügbar!

Halbzeuge und nach Kundenvorgabe gefertigte Teile aus Kohle, extrudierten und isostatisch gepressten Grafit

HPM® 80/20 AL is a resistance alloy with a unique composition that provides deep draw capability. It is used as a heating element in electronic applications. HPM® 80/20 AL has good forming characteristic and canbe deep drawn. It is not suitable for extended exposure to air at the elevated temperatures. Available Sizes: HPM® 80/20 AL is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) and width up to 12.0” (304.8 mm). Foil Product may be supplied to a thickness of 0.0001” (0.00254 mm) in width up to 4.0” (101.6 mm). Density:0.304 lbs./cu.in. Melting Point (Approx.):1400°C Electrical Resistivity @ R.T.:108 Microhm·cm Temperature Coefficient of Resistivity (TCR) (25°C to 105°C):100 ppm/°C Thermal Expansion Coefficient (20° to 100°C):13.4 x 10-6/°C Thermal Conductivity @ 100°C:13.4 W/m·K Magnetic Attraction:None

M6 x 14mm Set Screws Hex Bolts Stainless Steel A2 - DIN 933. A wide range of Stainless Steel fasteners including Hexagon Head Set Screws Stainless Steel DIN 933 at cost-effective price available from A2Z Fasteners.

Stalen Tafelonderstel X-poten Set 2 stuks. Staal gelaste constructie. Al onze stalen tafelpoten krijgen standaard een hoogwaardige poedercoating. Dikte poot: 60 mm x 60 mm. 4 stuks zware metalen platen. Het onderstel is voorzien van verstelbare pootglijders voor een perfecte afstelling op de vloer. Eenvoudig te monteren en te vervoeren.

Rubber Basket

Eco-friendly ester-based cleaner designed to remove bitumen, tar, grease, oil stains. An agent based on vegetable hydrocarbons with additives that make it easier to wash stains from the cleaned surface. CLEAN-BIT ECO is used to remove dirt from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. Does not cause corrosion of cleaned metal surfaces CLEAN-BIT ECO deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure. •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth.Gently wipedirty surface.For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. Wipe off the stains with a microfiber cloth. Packaging:5L metal containers and 1000 L mauser

Rasthebel in Edelstahl-Version und mit AUF/ZU-Rasterung.

Material: low carbon steel We produce our corrugated STAX segment wire steel fibers in the lengths of 50 mm and 34 mm. Application for our STAX segment wire steel fibers you find in industrial concrete floors and plates.

Product specifics: Stainless steel breaking bit, Copper corkscrew jointed mouth, Stainless steel turn cheeks, Mouth size:5", Mouth thickness:13MM, Cheek length:6" Material:Stainless steel Mouth size:5" Mouth thickness:13MM Cheek length:6"

Juego de cables de freno de mano, compatible para coches sin licencia, compuesto por cable de acero y espiral con martillo y terminales cilíndricos, inyectado en Zamak.

We turn your ideas into reality! For example as clean steam - boiler steam converters for connection to saturated steam units for sterilization and disinfection in hospitals. Stainless steel design Do you have specific ideas or requirements which will have to be fulfilled? We will gladly face the challenge. We manufacture according to your specifications! Our products are made of steel and stainless steel, custom-made for our clients. Tanks and other reservoirs made of steel and stainless steel, e.g. as clean steam - boiler steam converter Stair railings and staircase design Steel and stainless steel tube and sheet metal constructions Wrought iron garden fences and entrance gates Gate systems (also with operator) Garden fences Banisters for balconies and terraces Product displays Covers and hoods Sign holders Tanks and pressure vessels for leisure boats, caravans and other applications Dock constructions, fixtures and other accessories for aquatic sports DINO Anlage- und...

Durch das Läppen können wir die Ebenheit, Oberflächenbeschaffenheit und Maßhaltigkeit der Bauteile weiter optimieren und perfektionieren.

54 LT Painted Recycling Zero Waste Bucket 2506 - 2507 - Metal Zero Waste Recycling Bins

Cric à fût montant avec sabot fixe selon DIN 7355 et conforme aux normes industrielles adapté au levage de charges lourdes. Equipé d'une manivelle : SIKU = manivelle de sécurité avec frein de friction ou RAKU = manivelle à crochet avec double cliquet, charge de 1,5 à 10 t, levage de la charge sur la tête ou sur le sabot sidérurgique:sidérurgique

Cable ties are made by high quality of Nylon 6.6. resin. The property of this material is in moisture absorbed and released. Cable ties require to be contained the moisture and packed in the sealed packaging to have optimal performance. Hence, the conditions for keeping the packaging of cable ties are very important.

Stahl-Schachtabdeckung begehbar, Rahmen aus gekantetem Winkelprofil ohne Maueranker. Deckel mit 1 Bohrung als Aushebeöffnung.

Gummi-Edelstahl-Puffer Unser „Standard“ Gummi-Edelstahl-Puffer wird mit Naturkautschuk 55°Shore ±5°(NK-NR) gefertigt. Das Edelstahlmaterial ist standardmäßig von Ø 15 -75 mm aus V4A und von Ø 100-200 mm aus V2A. Sprechen Sie uns gerne auf „Sondervarianten“ an. Als Hersteller können wir zeitnah auf viele wünsche hinsichtlich Gummimischung und Gewindevarianten unkompliziert reagieren. Oder fragen Sie uns einfach — Unsere Ingenieure helfen Ihnen gerne den „Richtigen“ für Ihre Anwendung zu finden.

Abschließbare Unterschränke oder Briefboxen. Verschiedene Ausführungen

Tuyau droit en acier galvanisé à bord tombés pour l’aspiration de copeaux. Épaisseur 0,8 mm. Dimensions:80 mm Diamètre section Ø (mm):80 Longueur (m):1m, 2m

Plastic / Metal Ball Socket Q001 Body material:Steel ,DIN 1.0718 Compatible with:S15, S18, D15, D18, W18 Components:Q001 Unit Weight:0,014 KG

I tubi in gomma alimentare sono ideali per l’uso di aspirazione e mandata di liquidi, composti nutritivi, acqua calda e vapore. Hanno caratteristiche precise e certificate. Di norma sono utilizzati nel settore F&B.